/************************** BEGIN Esp32Reader.h **************************/
/************************************************************************
 FAUST Architecture File
 Copyright (C) 2020 GRAME, Centre National de Creation Musicale
 ---------------------------------------------------------------------
 This Architecture section is free software; you can redistribute it
 and/or modify it under the terms of the GNU General Public License
 as published by the Free Software Foundation; either version 3 of
 the License, or (at your option) any later version.
 
 This program is distributed in the hope that it will be useful,
 but WITHOUT ANY WARRANTY; without even the implied warranty of
 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 GNU General Public License for more details.
 
 You should have received a copy of the GNU General Public License
 along with this program; If not, see <http://www.gnu.org/licenses/>.
 
 EXCEPTION : As a special exception, you may create a larger work
 that contains this FAUST architecture section and distribute
 that work under terms of your choice, so long as this FAUST
 architecture section is not modified.
 ************************************************************************/

#ifndef FAUST_ESP32READER_H
#define FAUST_ESP32READER_H

#include <stdio.h>
#include "esp_err.h"
#include "esp_log.h"
#include "esp_spi_flash.h"
#include "esp_vfs_fat.h"
#include "driver/sdspi_host.h"
#include "sdmmc_cmd.h"

#include "faust/gui/WaveReader.h"

#define TAG "Esp32Reader"

#define SD_PIN_NUM_MISO GPIO_NUM_2
#define SD_PIN_NUM_MOSI GPIO_NUM_15
#define SD_PIN_NUM_CLK  GPIO_NUM_14
#define SD_PIN_NUM_CS   GPIO_NUM_13

struct Esp32Reader : public WaveReader {
    
    void sdcard_init()
    {
        ESP_LOGI(TAG, "Initializing SD card");
        ESP_LOGI(TAG, "Using SPI peripheral");
        
        sdmmc_host_t host = SDSPI_HOST_DEFAULT();
        sdspi_slot_config_t slot_config = SDSPI_SLOT_CONFIG_DEFAULT();
        slot_config.gpio_miso = SD_PIN_NUM_MISO;
        slot_config.gpio_mosi = SD_PIN_NUM_MOSI;
        slot_config.gpio_sck  = SD_PIN_NUM_CLK;
        slot_config.gpio_cs   = SD_PIN_NUM_CS;
        // This initializes the slot without card detect (CD) and write protect (WP) signals.
        // Modify slot_config.gpio_cd and slot_config.gpio_wp if your board has these signals.
        
        // Options for mounting the filesystem.
        // If format_if_mount_failed is set to true, SD card will be partitioned and
        // formatted in case when mounting fails.
        esp_vfs_fat_sdmmc_mount_config_t mount_config = {
            .format_if_mount_failed = false,
            .max_files = 5,
            .allocation_unit_size = 16 * 1024
        };
        
        // Use settings defined above to initialize SD card and mount FAT filesystem.
        // Note: esp_vfs_fat_sdmmc_mount is an all-in-one convenience function.
        // Please check its source code and implement error recovery when developing
        // production applications.
        sdmmc_card_t* card;
        esp_err_t ret = esp_vfs_fat_sdmmc_mount("/sdcard", &host, &slot_config, &mount_config, &card);
        
        if (ret != ESP_OK) {
            if (ret == ESP_FAIL) {
                ESP_LOGE(TAG, "Failed to mount filesystem. "
                         "If you want the card to be formatted, set format_if_mount_failed = true.");
            } else {
                ESP_LOGE(TAG, "Failed to initialize the card (%s). "
                         "Make sure SD card lines have pull-up resistors in place.", esp_err_to_name(ret));
            }
            return;
        }
        
        // Card has been initialized, print its properties
        sdmmc_card_print_info(stdout, card);
        ESP_LOGI(TAG, "SD card initialized");
    }
    
    Esp32Reader()
    {
        sdcard_init();
    }
   
    // Access methods inherited from WaveReader
};

#endif // FAUST_ESP32READER_H
/**************************  END  Esp32Reader.h **************************/